Interference Countermeasures

For successful run	Interference Type Occurring
Geomagnetic Real Time: Must be calm https://en.ilmatieteenlaitos.fi/auroras-and-space-weather?station=OUJ	Reduced Interference	1^st increase Schuman Resonance
Real Time Magnetometer Must be calm https://flux.phys.uit.no/Last24/Last24_jck1a.gif	2MEV has dropped and is stable or has been active for 3 or more days	Slightly Higher KP forecast (still in sweet spot). Sweet spot is between 7 & 12 with mid interference beginning at around 13 , up to a maximum of 25 >> using the Estimated Planetary K-indice Column
LST Window Must be at first 6 hour window (21:00) or 2 hr window 13:30) https://sidereal.app/calculatehttps://sidereal.app/calculate	Solar Wind speed no higher than 570	Cosmic rays baseline steady
Solar Wind Speed Must be forecast lower https://www.swpc.noaa.gov/products/wsa-enlil-solar-wind-prediction
If no upcoming weather change in coming days, than scan is done on pre-determined date with interference countermeasures TimeGate via Weather Watch https://www.wunderground.com/forecast/au/noosa-heads

Stock Type

Use stock with lowest votality.

Scan Date

If future weather shows no major switch during the Timegate, ARV session must be done on that date utilizing the above countermeasures.

Scan Time

The Scan should be done at the first opportunity when precognition energy begins rising (21:00 6hr window – 13:30 2 hr window). This is to offset any sudden increase in geomagnetic activity that may take place during the window period. Hence get the scan done ASAP when this window begins.

Pole Bal Kit

Place the pole bal kit to the left of where the PC will be the following day, leaving it overnight in that location.

Scans during stable green zone should take place as close as possible to 12 noon or around dawn. 21:00 works best around 12 noon and 13:30 around dawn.